 |
|
|
About mica
|
|
 |
Mica-bearing materials list
Structural micaceous laminate IZKAH
Spec. 3492-027- 00281944-01
It is used for heaters as a rigid electric insulating material and heating units frame.
Sheet size: 800x800 mm.
Thickness: 0,4-1,2 mm. Thermal resistance: up to 800?C
Electrical strength: not less than 16 kW/mm.
Flexible micaceous laminate IFG-KAH
Spec. 3492-086-00281915-02.
It is used for heaters as a flexible electric insulating material (heating spirals and others). Sheet size: 850x560 mm.
Thickness: 0,2; 0,3; 0,5 mm. Thermal resistance: up to 900?C
Electrical strength: not less than 15 kW/mm.
Capacitor micaceous laminate KIFSH; KIFP; KIFE; KIFK
Spec. 3492-026- 00281944
Electric insulating strips between capacitor segments for electric machines.
Sheet size: 800x800 mm.
Thickness: 0,4-1,2 mm. Operating temperature: up to 155?C.
Electrical strength: not less than 22 kW/mm.
Separating micaceous laminate: ITPFA; ITPFD
Spec. 3492-009-00284397-98
It is used for devices and heaters as rigid strips and electric heating element framework (heating spirals and others).
Sheet size: 550x300 mm.
Thickness: 0,5-2,0 mm. Thermal resistance: 700?C.
Average electrical strength: 18 kW/mm.
Separating micaceous laminate: PIFT
Spec. 21-25-327-90
It is used for electric machines as electric insulating strips.
Sheet size: 200x900 mm.
Thickness: 0,3-2,0 mm. Thermal resistance: up to 155?C.
Average electrical strength: 26 kW/mm.
Separating micaceous laminate: PIFE, PIFE-SH
Spec. 16-90-479.0184.002
Sheet size: 200x900 mm. Thickness: 0,25-5,0 mm.
Thermal resistance: up to 155?C. Average electrical strength: 26 kW/mm.
Separating micaceous laminate: PIFK
Spec. 16-90-479.0184.001
Sheet size: 200x900 mm.
Thickness: 0,15-2,0 mm. Thermal resistance: up to 180?C. Average electrical strength: 26 kW/mm.
Humidity-resistant micaceous laminate: GIK-S-PL (v); GIK-S-SPL (v)
Spec. 3492-001-00281884-00
Flexible insulation. Sheet size: 850x670 mm.
Thickness: 0,25-0,55 mm. Operating temperature: up to 155?C.
Average disruption voltage: 9 kW/mm.
Molding micaceous laminate: FIP-APL
Spec. 16-503.121-79
It is used as an electric insulating material formed when heated.
Sheet size: 840x540 mm.
Thickness: 0,25; 0,30; 0,35 mm. Operating temperature: up to 155?C.
Average electrical strength: 40 kW/mm.
Molding micaceous laminate: FIP-T
Spec. 21-0281916-31-91
Sheet size: 850x550 mm.
Thickness: 0,25; 0,30 mm. Operating temperature: up to 155?C.
Average electrical strength: 30 kW/mm.
Molding micaceous laminate: FIP-AHF-APL
Spec. 3492-057-00281915-98
It is used as an electric insulating material inside insulating constructions of traction machines.
Sheet size: 850x560 mm.
Thickness: 0,25; 0,30 mm. Operating temperature: up to 155?C.
Average electrical strength: 38 kW/mm.
Molding micaceous laminate: FIFK-T
Spec. 21-0291915-35-94
It is used for collector cups and formed insulating components of electric machines.
Sheet size: 850x650 mm.
Thickness: 0,25; 0,30 mm. Operating temperature: up to 180?C.
Average electrical strength: 30 kW/mm.
Separating thermostable mica TPF
Spec. 21-25-30-79
It is used as electric insulating strips of different designation and heater framework.
Sheet size: 560x310 mm.
Thickness: 0,5-20,0 mm. Thermal resistance: up to 150?C.
Electrical strength: not less than 5 kW/mm.
Flexible mica
GFS
Federal standard 6120-75
Flexible insulation of different designation
Sheet size: 1000x500 mm.
Thickness: 0,15-0,25 mm; 0,3-0,5 mm. Thermal resistance: up to 200?C.
Electrical strength: not less than 20 kW/mm.
Tubes and plugs of micaceous laminate and micanite
Spec. 21-25-50-79
It is used as an electric insulating material for current distributors operating at high temperatures. Inside diameter: up to 70 mm.
Length: up to 900 mm. Thermal resistance: up to 900?C. Electrical strength: up to 30 kW/mm.
Strips of micaceous laminate and micanite
Spec. 21-25-49-79
It is used as an electric insulating material of different designation.
Thickness: 0,1-20,0 mm. Operating temperature: up to 800?C. Electrical strength: up to 26 kW/mm.
Micaceous laminate tape
LIFEP-934 TPL
LIFK-TT Spec. 34-92-024-00281944-00
It is used as a coil and frame insulating material for electric machines.
Thickness: 0,11-0,15; 0,15-0,17 mm. Width: 15-35 mm. Operating temperature: 155; 180?C. Electrical strength: 40; 15 kW/mm.
|
Phlogopite
more
details
Crystallography
details
MICA
the Maryland Institute College of Art
details
Mica Lighting .
http://www.micalamps.com/
details
Phyllosilicate mineral of aluminium and potassium
http://en.wikipedia.org/wiki/Muscovite
details
Silver mica
http://www.patentstorm.us/patents/4025829.html
details
MICA-Mineral Information Institute
http://www.google.com/
details
Biotite
http://www.britannica.com/EBchecked/topic/66240/biotite
details
Muscovite.
http://www.mineralszone.com/minerals
details
Mica-aluminum silicate minerals.
http://www.answers.com/topic/mica
details
Mica Shields
details
Mica Histori & General Information.
details
Muscovite.
http://itc.gsw.edu/faculty/bcarter/physgeol/min/musc.htm
details
Britannica about mica.
Asian deposits, chemical etching, compressibility...
details
Micanite.
details
Mineral Muscovite.
details
The Mica Group of minerals
details
Mica - Explanation and use.
details
Mica grouping (chemical composition)
details
Molding micaceous laminate
details
Mica insulation
details
New electric insulating materials
details
SOGM - SMOG
details
Mica and ecology
details
English version (page about mica)
details
Chemical composition of mica
details
Molding micanite, Federal Standard 6122-75
details
Key trends in mica consumption. Application areas
details
Mica types, grades and application areas
details
If microwave oven's strip burned out
details
Universal insulating materials
details
Mica-bearing materials list
details
|
|
|
|
|
|
|
|
